Subscribe free to our newsletters via your
. Space Travel News .

A new concept for manufacturing wrinkling patterns on hard-nano-film/soft-matter-substrate
by Staff Writers
Beijing, China (SPX) Mar 25, 2014

This image shows a set of S-shaped curves with the same phase. (a) The parallel distance 800 um; (b) the parallel distance 200 um (aluminum film thickness 200 nm). Image courtesy Science China Press.

Wrinkling is a common phenomenon for thin stiff film adhered on soft substrate. Various wrinkling phenomenon has been reported previously. Wu Dan, Yin Yajun, Xie Huimin,et al from Tsinghua University proposed a new method to control wrinkling and buckling of thin stiff film on soft substrate.

It is found that the curve pattern on the soft substrate has obvious influence on the wrinkling distribution of the thin film/soft substrate. Their work, entitled "Controlling the surface buckling wrinkles by patterning the material system of hard-nano-film/soft-matter-substrate", was published in SCIENCE CHINA Physics, Mechanics and Astronomy 2014, Vol 57(4) issue.

Wrinkling and buckling at micro-scale are a popular phenomenon in stiff nano-film on compliant substrate due to external stimuli such as thermal mismatch. This feature has many applications in the design and fabrication of flexible electronics and devices, micro-cell arrays, optical gratings, and so on.

Thermal mismatch is one of the important factors which cause the surface buckling of stiff nano-film on compliant substrate. The wrinkling formation mechanism of the stiff film on compliant substrate of Polydimethylsiloxane (PDMS) is illustrated in Figure 1. The PDMS substrate is heated and will be expanded as a result during the deposition of the stiff film.

When the deposition is completed, the stiff film is formed on the substrate and the substrate cools down. The contraction of the substrate due to temperature dropping is restricted by the stiff film, for the thermal coefficient of the PDMS substrate is much larger than the stiff film.

In accommodating the deformation mismatch between the substrate and the stiff film, interface constraint force is induced consequently. The deformation compatibility causes compressive stress in the stiff film and tensile stress in the compliant PDMS substrate. Once the compressive stress in the stiff film exceeds the critical buckling stress, surface buckling and wrinkling will occur to balance the system.

The wrinkling appears randomly and in disorder in the uniform, continuous and isotropic film under the condition of equally biaxial compressive stress. The orientation ordering of wrinkles induced by isotropic buckling has been studied by simulation method but few works have been reported on how to control the surface wrinkling orientation according to the design specification, which is significant for the design of the flexible electronics.

The idea of regulating the orientation and distribution of the wrinkling by patterning the surface of the stiff film/compliant substrate system has been proposed by researchers recently. Various patterns have been designed on the PDMS substrate to control the buckling distribution and orientation. Some progress from recent work has been made in this research.

A photolithography process has been conducted to fabricate the curve patterns on the soft PDMS substrate and then the thin stiff aluminum film is deposited on the soft substrate. A few experimental results have been show in Figure 2 and Figure 3.

Through the wrinkling behavior of the thin stiff film/soft substrate by patterning the soft substrate with various curves, the conclusions are summarized: On the concave side of the curve, the wrinkling of the film surface is suppressed to be identified as shielding effect and on the convex side the wrinkling of the film surface is induced to be identified as inductive effect.

The shielding and inductive effects make the dis-ordered wrinkling and buckling controllable. This finding may give some new ideas to the designing of the wrinkling pattern of thin stiff film/soft substrate.

Wu D, Yin YJ, Xie HM, et al. Controlling the surface buckling wrinkles by patterning the material system of hard-nano-film/soft-matter-substrate. SCI CHINA Physics, Mechanics and Astronomy, 2014 Vol.57 (4): 637-643


Related Links
Science China Press
Nano Technology News From
Computer Chip Architecture, Technology and Manufacture

Comment on this article via your Facebook, Yahoo, AOL, Hotmail login.

Share this article via these popular social media networks DiggDigg RedditReddit GoogleGoogle

Memory Foam Mattress Review
Newsletters :: SpaceDaily :: SpaceWar :: TerraDaily :: Energy Daily
XML Feeds :: Space News :: Earth News :: War News :: Solar Energy News

Nanoscale optical switch breaks miniaturization barrier
Nashville TN (SPX) Mar 19, 2014
An ultra-fast and ultra-small optical switch has been invented that could advance the day when photons replace electrons in the innards of consumer products ranging from cell phones to automobiles. The new optical device can turn on and off trillions of times per second. It consists of individual switches that are only one five-hundredth the width of a human hair (200 nanometers) in diamet ... read more

Proton-M with two Russian communication satellites on board blasts off from Baikonur

ASTRA 5B delivered for integration on Ariane 5 launcher

Proton-M carrier rocket with two satellites abroad installed on Baikonur launch pad

Lockheed Martin Commercial Launch Services Announces Industry-Unique "Refund Or Reflight" Program

The Exploration of Murray Ridge Continues

Mars Reconnaissance Orbiter Resumes Full Duty

NASA Orbiter Safe After Unplanned Computer Swap

Mars name-a-crater scheme runs into trouble

China's Jade Rabbit lunar rover rouses from latest slumber

Study on lunar crater counting shows crowdsourcing effective, accurate tool

Spacesuits And Moon Notes Among The Stars At Bonhams NYC Auction

Russia to launch three lunar rovers from 2016 to 2019

Planet X myth debunked

WISE Finds Thousands Of New Stars But No Planet X

New Horizons Reaches the Final 4 AU

Thanks America, New Horizons Ahead

UK joins the planet hunt with Europe's PLATO mission

X-ray laser FLASH spies deep into giant gas planets

Crashing Comets Explain Surprise Gas Clump Around Young Star

Every red dwarf star has at least one planet

US to seek licence for domestic production of Russia's RD-180 rocket engines

NASA reveals hovering prototype planetary lander Morpheus

MIT team proposes storing extra rocket fuel in space for future missions

Boosters for Orion's Launch Vehicle Arrive to Cape Canaveral

Tiangong's New Mission

"Space Odyssey": China's aspiration in future space exploration

China to launch first "space shuttle bus" this year

China expects to launch cargo ship into space around 2016

ESO VLT Shows Comet Churyumov-Gerasimenko Brighter Than Expected

Be an Asteroid Hunter in NASA's First Asteroid Grand Challenge Contest Series

Hubble Telescope Witnesses Asteroid's Mysterious Disintegration

Silently and patiently streaking through the main asteroid belt

The content herein, unless otherwise known to be public domain, are Copyright 1995-2014 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. Privacy Statement All images and articles appearing on Space Media Network have been edited or digitally altered in some way. Any requests to remove copyright material will be acted upon in a timely and appropriate manner. Any attempt to extort money from Space Media Network will be ignored and reported to Australian Law Enforcement Agencies as a potential case of financial fraud involving the use of a telephonic carriage device or postal service.