| SPACE TRAVEL | SPACE DAILY | SPACE WAR | TERRA DAILY | MARS DAILY | SPACE MART | GPS DAILY | ENERGY DAILY |
 |
Houston TX (SPX) Nov 29, 2006 Imagine if you could attach an enormous walk-in closet to your house for more storage room. Seven astronauts set to fly aboard Space Shuttle Discovery will benefit from a similar arrangement. The commercially owned SPACEHAB logistics single module will serve as an extra "float-in closet" during STS-116, a 12-day mission to deliver hardware, supplies and a new crew member to the International Space Station. The SPACEHAB single module more than doubles the storage capacity of the orbiter's middeck. And because the 1,100-cubic-foot module is pressurized, powered and climate-controlled, it's a convenient "shirtsleeve" environment for the astronauts. They can enter through a tunnel connected to the middeck without ever having to suit up and step out into space. On the STS-116 mission, the module is filled almost to its three-ton capacity. Mission Specialist Joan Higginbotham will serve as the "load master," overseeing the transfer of the module's 5,800 pounds of cargo to the International Space Station. Items to be delivered include crew essentials like food, clothing and water containers, as well as spacewalk tools, a television camera and critical spare parts. The crew will free up room on the station by loading the SPACEHAB module with Russian Elektron oxygen generator and waste containers for the return trip to Earth. Behind SPACEHAB in the payload bay are the P5 integrated truss segment and another SPACEHAB product: the integrated cargo carrier. Measuring almost 14 feet wide and 7.5 feet long, this versatile carrier acts as a shelf inside the bay. Cargo attached to either side of the carrier can be accessed by the shuttle's robotic arm or by spacewalking astronauts. Among the equipment mounted on the carrier for STS-116 are debris panels to shield the station's Zvezda service module from micrometeorites, and three tiny microsatellites to be deployed late in the mission. SPACEHAB modules and integrated cargo carriers are prepared for launch at the company's own SPACEHAB Payload Processing Facility in Cape Canaveral, Fla., near Kennedy Space Center. When the hardware is tested and certified to fly, it is transported to Kennedy and installed in the shuttle orbiter. The SPACEHAB logistics single module flying on STS-116 was installed along with the other payloads into Discovery's payload bay on Nov. 11. The modules can be configured for cargo or science research experiments, and come in single or double sizes, depending on the mission's unique needs. The first SPACEHAB module, configured for research, lifted off on Space Shuttle Endeavour on mission STS-57 in 1993. Another SPACEHAB logistics module and integrated cargo carrier are slated to fly aboard Space Shuttle Endeavour on the STS-118 mission, scheduled for launch in 2007. Related Links SPACEHAB
ATK Conducts Successful Night Test Of Space Shuttle Reusable Solid Rocket Motor
Promontory UT (SPX) Nov 20, 2006Alliant Techsystems conducted a test firing of a Reusable Solid Rocket Motor (RSRM). The test had numerous objectives to obtain and validate performance data on upgrades being analyzed for the future. Among them was to collect nighttime imagery data in support of night launches of the Space Shuttle. The test also collected data that will be used to assist NASA in the development of its next-generation crew launch vehicle, the Ares I.
|
|
| The content herein, unless otherwise known to be public domain, are Copyright 1995-2006 - SpaceDaily.AFP and UPI Wire Stories are copyright Agence France-Presse and United Press International. ESA PortalReports are copyright European Space Agency. All NASA sourced material is public domain. Additionalcopyrights may apply in whole or part to other bona fide parties. Advertising does not imply endorsement,agreement or approval of any opinions, statements or information provided by SpaceDaily on any Web page published or hosted by SpaceDaily. Privacy Statement |
