Subscribe free to our newsletters via your
  Space Travel News  




Subscribe free to our newsletters via your




















ESA Conducts Vega Main Engine Test In Kourou

P80 static firing test being performed on 4 December 2007, using the solid booster test stand at the Guiana Space Centre, Europe's Spaceport in Kourou, French Guiana. This is the same facility that is used for firing tests on Ariane 5's solid-propellant boosters. Credits: ESA / CNES / CSG-SOV
by Staff Writers
Kourou, French Guiana (ESA) Dec 06, 2007
A prototype of the P80 rocket motor, which will power the first stage of ESA's new small launcher - Vega, was successfully tested on 4 December at the Guiana Space Centre, Europe's Spaceport in Kourou, French Guiana. Ignition occurred at 12:35 local time (15:35 UTC/GMT).

The motor delivered a mean thrust of about 190 tonnes for a nominal duration of 111 seconds. This is roughly one third of the thrust delivered by each of Ariane 5's solid booster stages.

More than 600 parameters were recorded during the firing test to monitor the performance of the motor. Initial analysis confirms that the measurements are fully in line with predictions.

Solid propellant rockets cannot be shut down once they have been ignited. The test engine was equipped with specially designed cutters to break open the casing and stop the test, should a malfunction have made this necessary. Qualification for flight

The first firing of the P80 took place on 30 November 2006. This was a qualification model and served to finalise the validation of the motor behaviour predictions and of the chosen technologies.

The motor tested yesterday was representative of the flight configuration. Once the data recorded during the test have been analysed and the engine has undergone post-test inspection, this firing is expected to complete qualification of the P80 in readiness for Vega's maiden flight, scheduled to take place by the end of 2008.

The P80 motor is about 12 metres high and 3 metres in diameter, and is loaded with 88 tonnes of solid propellant. Unlike previous motors of this size, it contains a single propellant segment, instead of several segments cast separately before being mated together.

Taking advantage of its similar dimensions, the propellant casting for the P80 is carried out at the Guiana Propellant Plant in Kourou, in the same pit as the 100-tonne lower segments of Ariane 5's solid boosters. However, instead of the steel outer structure used for the Ariane boosters, the P80 has a lightweight, filament-wound composite casing. It also incorporates a new, simplified design of igniter with a carbon fibre structure.

A new, steerable nozzle fabricated from composite material has been developed, with a simplified architecture made up of fewer elements, to reduce production costs. It also includes complex-formed cast metal parts and a new thermal insulation material. The nozzle joint is more flexible than on previous engines, allowing thrust vector control by means of electromechanical actuators. This is an additional technological improvement on a motor of this size, which usually needs to employ a more complex hydraulic system. "The first data received show that the pressure curve is following perfectly the prediction. It is an outstanding result," said Caroline Cros, the ESA team member responsible for P80 development "and I congratulate the industrial team, as well as our CNES and ASI partners, for this achievement."

Today's test was performed on the solid booster test stand (Batiment d'Essai d'Accelerateur Poudre - BEAP) in Kourou, the same facility used for firing tests on Ariane 5's solid-propellant motors. The P80 will now be disassembled for detailed inspection. Some of its components will be returned to Europe for examination and analysis.

"The qualification of the P80 motor is a cornerstone. It is the biggest mono-segment, filament-wound-case solid-fuel rocket motor ever developed and this takes us a step closer to the Vega maiden flight," said Stefano Bianchi, ESA's Head of the Vega programme. "The programme has a tight schedule for the maiden flight. We can proceed - as from today - with increased confidence. Let's make sure we will meet the next major milestones as scheduled."

About P80 and Vega

The P80 is being developed both as Vega's first stage and as a technology demonstrator. The development is part of the Vega programme, managed by an integrated project team led by ESA and involving staff from ESA, ASI - the Italian Space Agency and CNES - the French space agency. CNES also has a major responsibility in the management of the P80 development.

The industrial team is led by the French-Italian joint venture Europropulsion, under delegation from Avio SpA of Italy. Among the main industrial subcontractors involved in the P80 are SABCA of Belgium (thrust vector control system), Snecma Propulsion Solide of France (nozzle) and APP of the Netherlands (igniter).

ESA's Vega small satellite launcher is an all-solid-propellant, three-stage vehicle with a liquid-fuelled injection module, developed with the support of seven ESA Member States (Italy, France, Belgium, Switzerland, Spain, The Netherlands, and Sweden).

ELV SpA, a joint venture between Avio SpA and ASI, is the prime contractor for the Vega launcher development.

Vega is designed to lift single or multiple payloads to orbits of up to 1 500 km in altitude. Its baseline payload capability is to carry 1 500 kg to a circular, 700 km altitude, Sun-synchronous orbit. It can launch satellites ranging in mass from 300 kg to more than 2 tonnes.

This range of performance covers the needs of multiple applications in the fields of remote sensing, environmental monitoring, Earth science, space science, fundamental physics and research and technology for future space applications and systems.

Once qualified, Vega will be marketed and operated by Arianespace at the Guiana Space Centre, as a complement to Ariane 5 and Soyuz. It will serve the small to mid-sized satellite launch market.

Related Links
Vega
Rocket Science News at Space-Travel.Com



Memory Foam Mattress Review
Newsletters :: SpaceDaily :: SpaceWar :: TerraDaily :: Energy Daily
XML Feeds :: Space News :: Earth News :: War News :: Solar Energy News


New Thermal Protection Technologies For Reusable Launch Vehicles To Be Validated
El Segundo CA (SPX) Dec 04, 2007
Northrop Grumman and the U.S. Air Force Research Laboratory (AFRL), Dayton, Ohio, will help move the Air Force closer to its goal of developing reusable launch systems under a new concept research and development contract. The four-year, $2.9 million effort is known as the Advanced Development of Integrated Warm Structures (ADIWS). It will demonstrate the relative weight and performance benefits of using different types of thermal protection systems (TPS) and composite materials to produce reusable, two-stage-to-orbit launch systems.







  • ESA Conducts Vega Main Engine Test In Kourou
  • New Thermal Protection Technologies For Reusable Launch Vehicles To Be Validated
  • Defense Focus: Engineer truths -- Part 1
  • Northrop Grumman Demonstrates New Rocket Engine Design Using Oxygen And Methane Propellants

  • Arianespace warns US over Chinese space 'dumping'
  • Sea Launch Reschedules The Thuraya-3 Launch Campaign
  • Sea Launch Reschedules The Thuraya-3 Launch Campaign
  • Thuraya-3 Satellite Launch Delayed Again

  • Conditions right for shuttle launch: NASA
  • Atlantis Crew And Launch Team Prep For STS-122
  • All go for Thursday's Atlantis launch: NASA
  • All ready for shuttle Atlantis blastoff: NASA

  • New space mission aims to broaden Europe's ISS role
  • Jules Verne ATV Given Its Wings
  • The European Columbus Space Laboratory Set To Reach ISS
  • Spacewalkers Complete More Harmony Hookup Work

  • Richard Branson Trains For Virgin Galactic Spaceflight At The NASTAR Center
  • MU Engineers Develop Software Solution For Complex Space Missions
  • Computer predicts Voyager 2 milestone
  • Star Talk

  • China says space ambitions no cause for foreign concern
  • China To Launch Mars Probe In 2009
  • China denies lunar probe photos were faked: report
  • China Completes Enclosure Of Land For Fourth Satellite Launch Center

  • Humanoid teaches dentists to feel people's pain: researchers
  • Japan looks at everyday use of robots
  • New Japanese lightweight robot on wheels can talk
  • Can A Robot Find A Rock. Interview With David Wettergreen: Part IV

  • Multi-Tasking Rover Supports Multiple Missions
  • Spirit Breaks Free In Race For Survival
  • Noctis Labyrinthus, Labyrinth Of The Night
  • Rover Perseveres Despite Stall In Robotic Arm

  • The content herein, unless otherwise known to be public domain, are Copyright Space.TV Corporation. AFP and UPI Wire Stories are copyright Agence France-Presse and United Press International. ESA Portal Reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space.TV Corp on any Web page published or hosted by Space.TV Corp. Privacy Statement